Rogue Audio is one of the most dependable brand names when it comes to high-end audio systems. For years the brand has been recognized by audiophiles throughout the world as equipment that delivers clear and consistent quality in music.
What are the specs for the RP-7?
- Tube Complement:
- 4 x 12AU7/ECC82 tubes
- Frequency Response:
- 5Hz – 100KHz +/- 1 dB
- Gain Line Stage:
- 14 dB (20dB XLR)
- Rated Output:
- Maximum Output:
- Output Impedance:
- <10 Ohms
- 18.5 ”W X 4.5 ”H X 17” D
- 30 pounds
- Shipping Weight:
- 35 pounds
- Power Requirements:
- 120/240V – 50/60Hz
What else to know about the RP-7?With a perfect blend of tube smoothness and an almost unbelievable level of detail and transparency, the new RP-7 essentially redefines what a reference level tube preamplifier can achieve. The RP-7 is our first balanced preamplifier designed on the cutting edge RP-X hardware and software platform and every aspect of the RP-7 design is aimed at maintaining near perfect signal integrity. Beyond the computer optimized circuit topology, all of the capacitors, resistors and other critical parts are of ultra-high quality assuring the highest sonic integrity. The sophisticated electrical design is based on pure class A tube amplification with mosfet output buffering to provide huge drive along with a super low output impedance. Beyond the excellent sound, the feature rich RP-7 provides all of the functions demanded of a luxury hi-end preamp. Included are a home theater bypass, processor loop, mono button, defeatable display, slow start circuitry, and a host of other features. A full function remote provides additional convenience. Two pairs of XLR balanced inputs and three pairs of RCA line level inputs allow for numerous source components while two pairs of XLR balanced outputs along with two pairs of RCA variable outputs facilitate a wide range of output connectivity. Also included is a high power tube based headphone amplifier capable of driving even the most difficult headphones. The attractive industrial design includes an easy to read OLED display that further enhances the preamp's sleek and elegant appearance. The display provides all relevant information in large easy to read azure tinted characters. The ultra-high quality tactile buttons and knobs further add to the exclusive feel of the RP-7. General Features: \- Four 12AU7 tube mu-follower design\ - Ten function remote control\ - OLED display (defeatable)\ - Home Theater bypass/Unity gain inputs\ - Three pairs of RCA line leve inputs\ - Two pairs of fully balanced XLR inputs\ - One pair of fixed outputs\ - Two pairs of RCA variable outputs\ - Two pairs of fully balanced XLR outputs\ - Processor loop\ - Mono button\ - Heavy duty gold plated RCA inputs\ - Machined aluminum faceplate and knobs\ - Tube based high power headphone amp\ - Massive power supply\ - Slow start turn on sequencing\ - Auto mute at turn on/turn off\ - Detachable IEC power cord\ - Fully tested, burned in and auditioned\ - 3 year limited warranty (6 months on tubes)\ - Proudly hand crafted in the USA!
Brief History of Rogue Audio
Rogue Audio amplifier designs combine the finest in tube circuit topology with meticulously engineered circuit layout to achieve superior performance. Unflagging attention to the integrity of the audio signal path and power supplies results in truly superior designs. The most discriminating audiophile will delight in the impeccable fidelity of recordings reproduced through the amplifiers.
The matchless quality of Rogue amplifiers is obvious at first glance. However, Rogue’s quality is not just skin deep. Ultra-high tolerance components, two-ounce copper circuit boards, and silver plated switches are just a few of the many features which separate Rogue products from the competition. The amplifiers have also been designed to be extremely reliable. Electronic components are rated far beyond their intended use, and only the highest quality components are incorporated into the designs. The rugged chassis are treated to resist scratching and corrosion and the machined aluminum faceplates are anodized to protect their appearance.
Other Rogue Audio Products We Often Buy
Typically, StereoBuyers purchases mostly used amplifiers, especially the vintage amps and high-end Rogue Audio models.
StereoBuyers has purchased tens of thousands worth Rogue Audio brand equipment since 2014, with individual buys ranging from $100 to well over $50,000. If you are moving, ready to upgrade, or have Rogue Audio equipment you do not or will not be using, why not contact us today to find out if it is worth good money?
If you are interested in selling your used Rogue Audio equipment to us in the greater NYC area or Colorado, please click here to fill out a Free Quote Form and we will get back to you. If we agree on terms, we come to meet you where you want, and pay cash.
The following images show actual Rogue Audio equipment purchased by StereoBuyers.