Audio Research is one of the most dependable brand names when it comes to high-end audio systems. For years the brand has been recognized by audiophiles throughout the world as equipment that delivers clear and consistent quality in music.
What are the specs for the Audio Research SP-3?
- Frequency Response:
- ±1dB 10Hz-30kHz, IHF load. ±1dB of RIAA 30Hz-30kHz
- Harmonic distortion: Less than 0.005% at 5V RMS output, IHF load. IM distortion: Less than 0.005% at 5V RMS output, IHF load, SMPTE method
- Nose & Hum:
- High level inputs (unweighted wide-band): more than 90dB below rated output. Magnetic phono inputs (below 10mV input) 20Hz to 20kHz: more than 70dB below rated outputs. Power line components (hum): more than 66dB
- 57dB, magnetic phono input, main outputs, IHF load. 34dB, magnetic phono input, tape outputs, IHF load. 23dB, high level inputs, main outputs, IHF load. 0dB, high level input, tape outputs, IHF load
- Input Impedance:
- Magnetic Phono: 50K ohms typical (150 pf shunt). High Level: 100K ohms typical
- Output Impedance:
- Less than 600 ohms @ 1kHz (all outputs). Recommended load: 20K or greater
- Output Polarity:
- Maximum Inputs:
- 300mV RMS @ 1kHz (magnetic phono input). High level inputs overload proof.
- Rated Outputs:
- Maximum output: 25V RMS @ 1kHz, all outputs
- Power Supplies:
- Tube Complement:
- (2) 12AX7 LN, (6) 12AX7
- Power Requirements:
- 120/240V, 50/60Hz, 60 Watts
- Tone controls: Bass and treble variable ±18dB at 10Hz and 15kHz respectively
- 15 ⅝" W x 5½" H x 12½ D
- 14 lbs. Net. 20 lbs. Shipping
What else to know about the Audio Research SP-3?Audio Research has the reputation for the best product support in the industry, which includes service for products that date back to the beginning of the high-end industry and to the founding of our company over 30 years ago. As further support, we occasionally offer update programs for older products to extend their service life and enhance their sonic performance. The SP3 was introduced in 1972 and was instrumental in establishing Audio Research's world-wide reputation for sonic excellence. Several thousand were sold during the period of 1972-1976 and most, we believe, are still in service today. It is no longer possible to obtain the high voltage (525WVDC) electrolytic capacitors used in the original design. Along with this consideration, Audio Research has made significant sonic gains during the preceding 20+ years in the design of vacuum-tube preamplifiers. Therefore, it seems an appropriate time to redesign the power supply, using currently manufactured parts, and offer some synergistic sonic upgrades at the same time. We have prepared a replacement Printed Wiring Board for the SP3's power supply using a highly regulated circuitry quite similar to that used on our present products. This will considerably extend the useful service life of this product both functionally and sonically. The new power supply operates over a very wide range of input voltage (95 Volts to 135 Volts for 120 Volt units) providing regulated DC voltages to the vacuum-tube heaters as well as regulated B+ voltages. We have added automatic muting for turn-on, power interruption and turn-off. Along with the changes to the power supply, the input and output connectors are replaced with audiophile-grade gold-plated ones. Also, coupling and bypass capacitors on the main Printed Wiring Board are changed to brand names such as Infinicap, REL-Cap and WIMA. The sum of these changes results in a vacuum-tube stereo preamplifier (with RIAA phono) that approaches the performance of our current preamplifier product line. You will find the bass much more well-defined and extended, the mid-range smoother and more accurate, and the high frequency range extended and more accurate. For those of your who like classic tube sound, this modification takes a large step toward accuracy while preserving the things you like about vacuum tubes. This update applies to all versions of the SP3. Cost is US$995.00. It does not include tubes, if needed, or shipping. It is offered on a direct basis only, rather than through our dealer or distributor networks. Updates must be scheduled for timely turnaround. If you have premium quality tubes such as NOS Telefunken, or other quality brands, we suggest you remove and keep such tubes at home, not risking the possibility of loss or damage from handling or shipping. Recommended shipping: UPS. Units sent in without tubes will be tested and evaluated sonically with our tubes installed, but will be returned without tubes unless you request otherwise. Highly modified units may be deemed unacceptable for this update. \[From the ARC website]
Brief History of Audio Research
Other Audio Research Products We Often Buy
Typically, StereoBuyers purchases mostly used amplifiers, especially the vintage amps and high-end Audio Research models.
StereoBuyers has purchased tens of thousands worth Audio Research brand equipment since 2014, with individual buys ranging from $100 to well over $50,000. If you are moving, ready to upgrade, or have Audio Research equipment you do not or will not be using, why not contact us today to find out if it is worth good money?
If you are interested in selling your used Audio Research equipment to us in the greater NYC area or Colorado, please click here to fill out a Free Quote Form and we will get back to you. If we agree on terms, we come to meet you where you want, and pay cash.
The following images show actual Audio Research equipment purchased by StereoBuyers.